A better fit starts here
Choose the right drill bit

Match the bit to the material
Ground HSS bits are for metal with suitable cutting fluid. Brad-point bits locate holes in timber, not masonry. SDS-plus masonry bits need a compatible rotary hammer: they do not fit a standard round chuck. Step drills enlarge holes in sheet metal up to 2 mm, not thick plate.
Check chuck and shank fit
Round shanks need a chuck with the right capacity. The step set has 6 mm shanks with three flats. SDS-plus is a distinct connection, not a different name for a round shank. Do not improvise a connection or exceed your machine’s limits.
Tile and glass: no hammer
The spear-point set is intended for ceramic wall tile and ordinary non-tempered glass, not porcelain or toughened glass. Use rotary action only, water cooling, light pressure and suitable eye protection. Do not drill into installed material without checking for concealed services and safe access.
Secure, cool and clean
Clamp work, support the exit face where appropriate and follow the drill manufacturer’s speed guidance. Clear swarf with a brush, never fingers. Let hot bits cool before storage; dry shanks after water cooling. If the material is unknown, stop and ask rather than forcing a bit.
Compare drill bits